2-Piece Cast Steel Metal Seat Floating Ball Valve

2-Piece Cast Steel Metal Seat Trunnion Ball Valve

  • DN:1/2″to 8″
  • Connect:Flanged
  • Metal Seat:-29~425℃
  • Tightness:ANSI/FCI 70.2 IV
  • Operation:Pneumatic Actuator
  • Material:WCB,CF8,CF8M,CF3M
  • Pressure:PN10,PN16,150LB

Recommended for medium

water, pulp, oil, steam, acids, alkali, ammonia, urea, natural gas with sulfur etc.

Description

The Trunnion Flanged Ball Valve is in two-piece body, mainly intended for shut off or isolating service. When it is actuated, the torque is transmitted to the stem down to drive ball bore to be parallel with valve flow path at full open position or cross with valve flow path at full closed position.

  • It is with bidirectional tightness allowing for shut off at both sides. Spring loaded metal and soft seated designs are available for various applications.

  • Floating ball valve adopts elastomer sealing in a special double oblique surfaces design with much lower friction and operation torque.

  • For a low pressure application, the small contact area between the sealing and ball provides a relative high seat pressure rate to assure a reliable tightness.

  • As the pressure gets higher, the contact between the seal ring and ball gets more closed accordingly with a larger contact area , therefore, a large pressure undertaking capacity of seal ring to assure a reliable tightness

  • This valve is applicable for process conditions with pressure range of PN1.6MPa-4.0MPa, ANSI ciass150-class300 and temperature range of -29℃ to 300℃ for shutting off or allowing the medium flow such as water, pulp, oil, steam, acids, alkali, ammonia, urea, natural gas with sulfur etc.

  • It features in quick open and close, low flow resistance, reliable tightness, wide application and long service life etc. Therefore, it is widely used in industries such as pulp and paper, petroleum, chemical, water power plant, coal-fire, power plant and water treatment etc.

Advantages
2-Piece Cast Steel Metal Seat Floating Ball Valve
2-Piece Cast Steel Metal Seat Floating Ball Valve
2-Piece Cast Steel Metal Seat Floating Ball Valve
2-Piece Cast Steel Metal Seat Floating Ball Valve
2-Piece Cast Steel Metal Seat Floating Ball Valve
2-Piece Cast Steel Metal Seat Floating Ball Valve
2-Piece Cast Steel Metal Seat Floating Ball Valve
2-Piece Cast Steel Metal Seat Floating Ball Valve
Specification

Material Table

2-Piece Cast Steel Metal Seat Floating Ball Valve
2-Piece Cast Steel Metal Seat Floating Ball Valve

Dimension Table

2-Piece Cast Steel Metal Seat Floating Ball Valve

DIN PN16 Dimension Table

2-Piece Cast Steel Metal Seat Floating Ball Valve

DIN PN25 PN40 Dimension Table

Metal Seat Floating Ball Valve

ANSI 150 Dimension Table

2-Piece Cast Steel Metal Seat Floating Ball Valve

ANSI 300 Dimension Table

2-Piece Cast Steel Metal Seat Floating Ball Valve

Note: Consult factory to get detailed dimension for manual or electrical type Metal Seat Floating Ball Valve

Why Choose Us

ZC Automation is specialized in the designing and manufacturing of a full line of industrial valves

A broad line of materials offered and fabricated

  • Steel material range is from conventional cast or forged steel to special alloy materials like Monel,Inconel,Hastelloy.
  • Duplex steel and cast Iron materials in GG20, GG25 or ASTM A126 Gr. B
  • Ductile Iron of GGG40, GGG50 or A536.

Designing and Manufacturing standards strictly conform to API, ASTM, ANSI, AWWA, JIS, DIN, BS and ISO.

Capability is not only limited of those standard items, but also focus on those most special and severe services items

Our Broad product lines are :

  • Ball valves series:
  • General Valves Series:
  • Special Series:
  • Butterfly Valves Series:

Welcome come to visit and cooperate with us,we can help you build your brand in your country.

ZC AUTOMATION
ZC AUTOMATION
ZC AUTOMATION
ZC AUTOMATION
ZC AUTOMATION
ZC AUTOMATION
ZC AUTOMATION
ZC AUTOMATION
ZC AUTOMATION
ZC AUTOMATION
ZC AUTOMATION
ZC AUTOMATION

FAQ

We mainly supply kinds of ball valve,globe valve,gate Valve,check valve,butterfly valve,knife gate valve etc. Our product line of valves, actuators and accessories offer the best compatibility, economy and quality performance for the flow control industries

Please advice 1.medium and working temperature 2.connection way and working pressure 3.valve material 4. leakage class and face to face dimension 5.flow rate, P1, P2 and density for control valves to helps do the sizing calculation accordingly.

Yes, we are a manufacturer who focus on industrial valves engaged in pulp,paper,chemical,petrochemical,sugar & ethanol,water&wastewater,oil & gas,mining & slurry,power,food & beverage and etc.

No, we don’t sell other brands valves, but you may send me your detailed specification requirement if our brand is ok for you. if you are building independent brand itself, we can support you and we accept OEM.

Yes, of course we can deliver them by air,but I have to remind you that the freight costs will be very expensive.

Yes, we can. please send me your detailed requirement then we will choose the suitable valves to quote you

Model Selection Table

Leave A Message

Contact ZC

Tel:+86 18057760692
Email:contact@zcindustryvalve.com

Selection Guide

We will help you to choose the most suitable industrial valves click here